First unplug TV. EEprom can be removed by 30watt solder iron and desoldering wire but don't over heat board. use tweezers to slowly pull out eeprom. when working on TVs work in a static free area like a garage (off rugs and carpet) . i recommend using thin rubber gloves try to hold eeprom's body, don't touch the pins. put new eeprom in by lining up the circle depression in corner of eeprom to the marker dot or stripe on the board. Next solder the pins to board (don't over heat pins on eeprom or board) soldering each pin should only take 1-2 seconds for each pin. Double check your work, make sure solder didn't overflow and solder 2 pins together. Now test your TV. Let us know if it fixes your TV. Share this blog if it does, thanks.
Tidak ada komentar:
Posting Komentar